CARE AND CLEANING
This product contains no user serviceable parts.
•
Unplug the cord and wait for appliance to cool completely before cleaning.
•
Carefully open the kettle lid.
•
Clean the base and the outside of the kettle with a soft damp cloth.
•
To clean the inside of the kettle, open the lid and wash with warm sudsy water then rinse and dry.
•
Never immerse the kettle or base in water or other liquids.
•
Kettle and base are NOT dishwasher safe.
•
Do not use any abrasive cleaners or metal pads to clean the kettle.
•
Never spray or apply cleaner directly onto or into the kettle.
Decalcifying
•
Fill the kettle with water and cooking white vinegar mixture (½ vinegar and ½ water) up to the MAX
mark.
•
Close the lid and place the kettle on the base.
•
Unwind the cord and plug into a standard 120 Volt AC outlet.
•
Press the ON button (I/O) to boil the mixture.
•
Run through the complete boil cycle with the decalcifying solution and repeat 3 times.
•
Fill the kettle with cold water up to the MAX mark.
•
Turn on the kettle and complete a boil cycle.
•
You may have to repeat this step to eliminate the vinegar smell/taste.
•
Press the OFF button (I/O).
•
Wash the kettle and base as instructed in the CARE AND CLEANING section.
STORAGE AND MAINTENANCE
•
Always allow the kettle to completely cool before storing.
•
Wrap cord around cord storage.
•
Store your kettle in a dry location, such as on a tabletop, countertop, or on a cupboard shelf.
•
Other than recommended cleaning, no further user maintenance should be necessary.
Electric Tea Kettle
USE AND CARE INSTRUCTIONS
9