Mark SUPERBAT LED 72 Manual Del Usuario página 4

INSTALLATION
The unit must be mounted on a bracket always using the correct holes in the SUPERBAT LED 72 handles
and screws that fit it perfectly. Always make sure the unit is securely attached to avoid vibrations and
slipping during operation. Always make sure that the structure to which you are connecting the unit is
secure and capable of supporting a weight of 10 times the weight of the unit. Always use a safety cable
that can support 12 times the weight of the unit when installing the appliance. The equipment must be
installed by professionals in a place out of the reach of people and where no one can pass under it.
SUPERBAT LED 72 can be configured in different ways through its panel. It has a series of icons with their
own menus. Use the UP and DOWN buttons to navigate between these icons. Press ENTER to enter them
and use the UP and DOWN keys again to choose the different functions and values.
Connect the included power cord and press the POWER button. You can charge the battery while using
this mod by holding down the switch marked CHARGE SWITCH.
ADVANCED USE
The different icons and associated functions on the unit's control panel are detailed below.
DMX
When pressed, it is possible to select the DMX start channel with the UP and DOWN keys. It will show
the saved DMX mode (6 or 10 channels). We can change this in the SET icon.
SHOW
Allows you to select the different automatic programs and their speed
Auto Colour: Automatic colour change
Auto Fade: Activates the colour and fades to the next colour.
Auto Sudden: Activates the colour and fades to black before changing to another colour
Auto Strobe: Strobe function with each colour
SOUND
Activation of either of the two audio colour change modes. A graph will appear on the screen with the
RGB value in real time
COLOR
Custom color: It is possible to select the custom tone by modifying the value of the 6 primary colors
Static color: Allows you to select one of the 32 already predefined colors
3