Makita ML705 Manual De Instrucciones página 6

• To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click. If not, it may accidentally fall out
of the tool, causing injury to you or someone around
you.
• Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Lighting up the lamp (Fig. 3)
CAUTION:
• Do not look in the light or see the source of light
directly.
• Push the switch to light up the light. To turn off, push
the switch again.
NOTE:
• When remaining battery capacity becomes lower,
light turns off automatically. So you should charge
the battery cartridge soon.
• Operating time may be shortened according to
environments and battery conditions.
OPERATION
Clip (Fig. 4)
User can carry the light with hands free by hooking the
clip on a belt.
Attaching flexible leg (Fig. 5, 6 & 7)
Slide the C-shaped portion of the flexible leg over the light
in the direction of the arrow.
Hold the flexible leg securely in place by fitting the raised
portion of the flexible leg in the hole of the clip.
Removing flexible leg (Fig. 8, 9)
Slightly raise the grab light's clip and remove raised part
of flexible leg from clip slot, and then slide of the leg as
shown in the diagram.
CAUTION:
• Do not remove the flexible leg while the raised part
of the leg is inserted in the clip slot of the grab
light.
Doing so may damage the grab light.
Using flexible leg (Fig. 10, 11)
CAUTION:
• Do not wind the flexible leg over a part of body
such as hand or arm to use the flash light.
This may cause the tool to drop, resulting in the flash
light damage, personal injuries etc.
• Do no carry the flash light by flexible leg.
This may cause the flash light to drop, resulting in the
flash light damage, personal injuries etc.
• Do not wind the flexible leg over moving objects
such as bicycle to use the flash light.
Vibration may cause the flash light to drop, resulting in
the flash light damage, personal injuries etc.
By attaching the flexible leg to the light, the light can be
set on or fixed at various locations for hands-free lighting.
6
e.g. 1) The light can be set on the surface of a
workbench or the like by standing the light on the
flexible leg.
e.g. 2) The light can be fixed by wrapping the flexible
leg around a pipe, bar or the like.
NOTE:
• Do not bend the flexible leg excessively. Doing that
may cause flash light breakage.
• When winding the flexible leg over a rod, make
sure that it grabs securely to avoid its accidental
turn and drop before releasing your hand from the
flash light.
• The flexible leg is for use with the flash light only.
• Do not use it for other application. Using for other
application may cause the flash light damage,
personal injuries etc.
MAINTENANCE
CAUTION:
Always be sure that the cleaner is switched off before
carrying out any work on the cleaner.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by a
Makita Authorized Service Center.
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or
attachment for its stated purpose. If you need any
assistance for more details regarding these accessories,
ask your local Makita service center.
• Flexible leg
• Battery Charger
• Battery Cartridge