Publicidad
SECURITY
Avoid accidents. After unpacking the product, keep the packaging material out of
the reach of children.
ATTENTION! Do not assemble the seat cushion before attaching the screw
to the oil pump, otherwise you may damage the cushion assembling pins
(clicks) when removing without need.
INSTALLATION AND ASSEMBLY
1.
Position the backrest assembly (B) at
90° from the floor to begin assembly on
the seat set (A).
2.
Position the bushing on the inner side of the chair. Center the spacer between
the backrest plate and the plate fixed to the seat, finishing with the attachment of
the washer and the M8 screw on the external side. Use the 6.00 mm Allen wrench
(shipped with the product) for fastening.
Bushing
3.
Important:
• Check the tightness to ensure it is safely and firmly assembled.
• Always keep the chair lubricated for a perfect operation.
Spacer
Washer
Screw
Publicidad
