Descargar Imprimir esta página
LEGRAND Sanus BSA-IWP1 Manual De Instrucciones
LEGRAND Sanus BSA-IWP1 Manual De Instrucciones

LEGRAND Sanus BSA-IWP1 Manual De Instrucciones

Publicidad

Enlaces rápidos

Cable Concealer
Recessed Power Kit
BSA-IWP1
Model:
Installation Instructions
Manual de instrucciones
6901-603102
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE
- SAVE THESE INSTRUCTIONS
Legrand electrical products conform to and should be properly grounded
in compliance with requirements of the current National Electrical Code
or codes administered by local authorities. All electrical products may
present a possible electric shock or fire hazard if improperly installed
or used. Legrand electrical products may bear the mark of a Nationally
Recognized Testing Laboratory and should be installed in conformance
with current local and/or the National Electrical Code.
CAUTION:
Avoid potential personal injuries and property damage!
● RISK OF FIRE AND SHOCK
amp branch circuits.
● RISK OF FIRE
- DO NOT install power supply cord within the wall cavity.
● RISK OF FIRE AND SHOCK
any other circuits or outlets.
● Do not use this product for any purpose not explicitly specified
by manufacturer.
● Manufacturer is not responsible for damage or injury caused
by incorrect assembly or use.
● If you do not understand these instructions or have doubts
about the safety of the installation, assembly or use of this
product, contact customer sevice.
1
INSTALLATION PREPARATION
PREPARACIÓN DE LA INSTALACIÓN
Up to 6 feet
Hasta 6'
Up to 6 feet
Hasta 6'
Find your desired locations (between studs).
Busque los lugares deseados (entre montantes).
CUTTING TEMPLATE
PLANTILLA DE CORTE
- Only intended for use on 15
- DO NOT connect this box with
2
CUTTING TEMPLATE
PLANTILLA DE CORTE
Tools Needed
Herramientas Necesarias
Level
Pencil
Nivel
Lápiz
Tape
Measure
Phillips
Cinta métrica
Screwdriver
Phillips
Destornillador
INSTRUCCIONES DE
SEGURIDAD IMPORTANTES
LEA EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO – CONSÉRVELAS
Se ajustan a los productos eléctricos de Legrand y correctamente deben
basarse en cumplimiento de los requisitos del código eléctrico nacional
actual o códigos administrados por las autoridades locales. Todos los
productos eléctricos pueden presentar un posible choque o incendio si mal
instalado o utilizado. Productos eléctricos Legrand podrán llevar la marca
de un nacionalmente reconocido laboratorio de prueba y deben instalarse
de conformidad con el actual local y/o el código eléctrico nacional.
PRECAUCIÓN:
Evite posibles lesiones personales y daños materiales.
● Riesgo de incendio y choque
en circuitos de 15 amperios
● Riesgo de incendio
dentro de la cavidad de la pared
● Riesgo de incendio y choque
a cualquier otros circuitos o los tomacorrientes
● No utilice este producto para ningún otro propósito que no sea
el explícitamente especificado por el fabricante
● El fabricante no se responsabiliza de ningún daño o lesión
resultante del montaje incorrecto o el uso indebido
● Si no entiende las instrucciones o si tiene dudas acerca de la
seguridad de la instalación, el montaje o el uso del producto,
póngase en contacto con el Servicio de Atención al Cliente.
TRACE
DELINEAR
Stud Finder
Localizador
de montantes
Slotted
Screwdriver
Ranurado
Destornillador
- Solamente destinados a uso
- No instale el cable de alimentación
- No conecte este cuadro
3
CUT
CORTAR
Drywall
Saw
Sierra
para yeso

Publicidad

loading

Resumen de contenidos para LEGRAND Sanus BSA-IWP1

  • Página 1 Legrand electrical products may bear the mark of a Nationally instalado o utilizado. Productos eléctricos Legrand podrán llevar la marca...
  • Página 2 6436 City West Parkway, Eden Prairie, MN 55344 Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations.