Smart Mode - Airo -L1-02 Manual De Usuario E Instalacion

Operation instructions
invalid for

SMART mode(

How to set SMART mode?
SMART
Press the button.
Enters SMART mode(fuzzy logic operation)
Result :
directly regardless of the unit is on or off.
Temperature and fan speed are automatically
set based on theactual room temperature.
For the split-type models, such as wall-mounted air conditioners and some floor-standing air conditioners,
their operation mode and set temperature should be determined based on the indoor temperature.
Heat pump models
Indoor temperature
21℃(70°F) or below
21℃-23℃(70°F-73°F)
23℃-26℃(73°F-79°F)
Over 26℃(79°F)
Cooling only models
Indoor temperature
23℃(73°F) or below
23℃-26℃(73°F-79°F)
Over 26℃(79°F)
For commercial air conditioner products, such as cassette type air conditioners, duct type air conditioners,
ceiling & floor air conditioners and some floor-standing air conditioners, their operation mode should be
determined based on the difference between the indoor temperature and set temperature.
Heat pump models
Indoor temperature
Below T-3℃(3°F)
T-3℃(3°F)≤T
Over T+3℃(3°F)
Cooling only models
Indoor temperature
T+3℃(3°F) or below
Over T+3℃(3°F)
SMART button is ineffective in SUPER mode.
ECONOMY button is ineffective in SMART mode.
Press MODE button cancel SMATR mode.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, For the on/off, you can choose from -2 to 2, for the inverter you can choose
from -7 to 7. if you still feel uncomfortable.
some models
Operation mode
HEATING
FAN ONLY
COOLING
Operation mode
FAN ONLY
COOLING
Operation mode
FAN ONLY
≤T+3℃(3°F)
indoor
Operation mode
FAN ONLY
COOLING
)
PRESS
DRY
DRY
HEATING
COOLING
19
SMART
TEMP.
Target temperature
22℃(72°F)
Room temperature
decrease 2℃( 2°F) after
operate for 3 minutes
26℃(79°F)
Target temperature
Room temperature
decrease 2℃( 2°F) after
operate for 3 minutes
26℃(79°F)
Target temperature
T
T
T
Target temperature
T
T
MODE