Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing Considerations
Multiple devices can be paired to the MBT-RXv2, but only
one streaming device can connect at a time. The MBT-RXv2
will remember the last device that was connected to it and
reconnect with it automatically. If that streaming device is
not active, then other paired streaming devices can connect
manually, or new streaming devices can be paired.
When a connected streaming device is out of range for
more than one minute, the MBT-RXv2 will automatically
disconnect the streaming device and return to pairing
mode (internal LED will flash). When that same device
comes back into range, it should be reconnected to the
MBT-RXv2 manually.
Pairing Your Device
1. Ensure your streaming device has its Bluetooth® feature
enabled and that the MBT-RXv2 is on. The internal LED
will flash to indicate pairing mode is active.
2. Select "JLA MBT-RX" from your device's Bluetooth®
setup menu.
3. When successfully paired, the internal LED will illuminate
solid.
4. Once connected, all playback controls are managed
using the connected streaming device.
Specifications
Bluetooth® Profile
Bluetooth® Core Spec
Connection Range
Frequency Response
Operating Voltage
Current Draw / Fuse Value
Remote Output Capacity
Audio Outputs
Output Voltage
A2DP (High-Quality, Stereo Audio)
Version 5.0 with Qualcomm® aptX-HD
Up to 35 ft / 11 m
20 Hz - 20 kHz (±1dB)
10 - 16 VDC
40 mA / 2 A
1 A
S/N Ratio
100 dB (20 Hz - 20 kHz)
One stereo pair of RCA plugs
4V RMS
Publicidad
