Hampton BARNSLEY FSS61119F Guía De Uso Y Cuidado página 4

Assembly
1
Connecting the ottoman legs
□ Lay one of the ottoman legs (A) flat on the ground.
□ Align the three holes on one side of the ottoman seat (B) to
the three holes on the ottoman leg (A).
□ Attach the ottoman seat (B) to the ottoman leg (A) using
M6x40 bolts (AA), M6 washers (DD), and spacers (CC).
□ Repeat this step for the other ottoman leg (A).
NOTE: Loosely tighten all bolts using hex wrench (EE).
B
A
3
Tightening the bolts
□ Tighten all bolts and ensure that all
connections are secure before use.
□ Place the seat cushion (D) on the ottoman
Care and Cleaning
□ For best results, clean the frame with a damp cloth and dry the frames thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
□ Do not clean with abrasive materials, bleach, or solvents.
□ Store the ottoman in a dry, sheltered place when not in use.
□ Keep the ottoman out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
AA
DD
CC
CC
.
.
4
2
Connecting the leg connector to
the ottoman legs
□ Align the holes of the leg connector (C) with the holes on
the inside of each ottoman leg (A).
□ Attach the leg connector (C) to ottoman legs (A) with
M6x18 bolts (BB) and M6 washers (DD).
□ Once all bolts are in place, fully tighten all bolts and ensure
that all connections are secure before use.
DD BB
C