Publicidad
Idiomas disponibles
Idiomas disponibles
Finish Mounting
❒
Align the cover plate, gasket, and the mounting
bracket hole. Secure with M5 x 0.8 x 40 mm
mounting screw supplied.
❒
Push the rubber plug firmly into place.
❒
If not installed on a weatherproof box, caulk
between the cover plate and mounting sur-
face with silicone weather sealant.
To obtain maximum lamp
life, keep the tubular
lamps horizontal.
Rubber Plug
CAUTION: To Avoid Fire Or Burn Hazards:
• Allow fixture to cool before touching. The bulb and the fixture
operate at high temperatures.
• Keep fixture at least 3" (76 mm) from combustible materials.
Do not aim at objects closer than 3' (1 m).
• Use only type T 250W (max.) tungsten halogen 120 VAC
lamps.
Specifications
Range .............................. 70 feet (21.0 m); 100 feet
Sensing Angle ................. Up to 270° (Adjustable)
Fixture Load . ................... Up to 500 Watts Maximum
Sensor Load Capacity ..... Up to 1000 Watts (8.3 amps)
Power Requirements ....... 120 VAC, 60 Hz
Operating Modes . ............ TEST, A UTO and MANUAL
Time Delay . ..................... 1, 5, 20 minutes
HeathCo LLC reserves the right to discontinue
products and to change specifications at any time
without incurring any obligation to incorporate new
features in products previously sold.
-8-
(30.5 m) with Range Boost.
Varies with surrounding
temperature.
Tungsten Incandescent [Up
to 250 Watts Maximum each
lamp holder.]
Maximum Tungsten Incan-
descent
MODE
598-1291-02
Publicidad
