PROMAT 4000858775 Manual De Instrucciones Original página 9

Operation
Before the first Use
Dispose of any packaging material not required or keep it in a place not accessible
to children. Risk of suffocation!
The tool presetter is not a toy and does not belong in the hands of children.
Please note that the angle sensor is a sensitive precision device that needs to be
handled with due care. Do not expose it to sudden shocks or strong mechanical
influences and do not let it fall.
Keep the device dry and do not allow liquids of any kind to penetrate into the
device.
Switching the device on and off and zeroing
Switch the device on using the ON/OFF/LEVEL button (2). The angle sensor is
now in absolute measuring mode and works like a spirit level. The current
inclination is shown in the display.
To set the zero point to another inclination, place the device on a reference surface
with the desired inclination and press the ZERO button (4). The angle sensor is
now in relative measuring mode. Zero is now shown in the display and all
deviations relate to this reference. After switching the device on and off, the device
is once again in absolute measuring mode.
Use the HOLD button (3) to lock the measured value on the display. Pressing the
HOLD button again releases the display.
To switch the device off, press and hold the ON/OFF/LEVEL button (2) once again.
The device switches off automatically after 5 minutes without use.
The device is fitted with magnets (5) on the sides and underside to attach it to
magnetic reference surfaces.
Changing the battery
When the symbol is shown in the display, the batteries should be promptly
replaced.
To do so, remove the Phillips head screws on the rear of the device, remove the
back panel and replace the battery with a new 9 V battery 6LR61.
Do not charge or dismantle batteries, throw them into a fire or short-circuit them.
Only use batteries of the same type and size.
Maintenance and storage
Do not use aggressive chemicals, solvents or abrasives to clean the device. Do not
immerse the device in any type of liquids and do not allow liquids to penetrate into
5