Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions for Table-top Console
13. Attach 2 Cable Wheels (L) to the backside of the Back Frame (E) with the 5/8" Bolts (2) and
tighten with the enclosed Allen wrench.
NOTE: You can use the Cable Wheels to help keep the entertainment center's cables and
cords organized.
14. The USB Hub is pre-attached at the bottom round hole of the Back Frame (E) when shipping.
Also, you can put it between the top and middle shelves as needed. To change the location of
USB hub, you need to interchange it with the upper round grommet on the Back Frame (E).
A
E
5/8" Bolt
(4 used in this step)
②
9
E
L
2
Publicidad
