MSG Equipment MS00174 Instrucciones De Uso página 4

English
Special wrench MS00174
The MSG Equipment special tool is designed for the high-quality disassembly and assembly of
individual components and assemblies of a vehicle. The special tool MS00174 is used in the
process of repairing the steering rack HO411.NLF0.R, which is installed on the following vehicles:
ACURA
TLX 14-...
•
HONDA
ACCORD IX sedan 12-...
•
The MS00174 wrench allows you to unscrew/screw the top nut of the steering rack worm gear,
ensuring its integrity for future use.
2. INSTRUCTIONS FOR THE USE OF SPECIAL TOOLS
1. Always use the special tool for the work for which it is intended and only with the unit for
which it was designed.
2. When working with the special tool, follow general safety and accident prevention
requirements.
3. For proper and safe use of the special tool, it is prohibited to:
• apply impact loads;
• heat the tool above 250°С.
WARNING! The manufacturer is not responsible for any damage or injury to human health
resulting from non-compliance with the requirements of this manual.
4
1. APPLICATION