Please read the user's manual carefully before the installation and the first operation of the amplifier.
SPECIFICATIONS
Output Power RMS (14.4 V)
Loudspeaker impedance
Frequency response
Total harmonic distortion
Signal-to-noise ratio
Input sensitivity
Input impedance
Lowpass filter
Subsonic filter
Bass Boost
Phase Shift
Master/Slave mode
Pre-amplifier inputs
High level inputs
Auto turn-on
Operating voltage
Fuse rating
Dimensions (B x H x L)
All specifications are subject to change
ZXE4000/1
1 x 800 W @ 4 Ω
1 x 1400 W @ 2 Ω
1 x 2000 W @ 1 Ω
1 – 8 Ω
10 – 160 Hz (-3 dB)
< 0,5 % (80 Hz)
> 105 dB
0,2 – 7 V low level
0,4 - 10 V high level
10 kΩ
40 – 150 Hz @ 12 dB/octave
10 – 35 Hz @ 12 dB/octave
0 – 12 dB @ 40 Hz
0 – 180°
Via OUT MASTER/ IN SLAVE
2 x RCA (L/R)
Via enclosed cable connector (L/R)
Only via the high level inputs
+12 V (9 – 15 V), negative ground
1 x 200 A (external cable fuse)
248 x 64 x 362 mm
9