FUXTEC CTL-900 Manual De Instrucciones Originales página 27

Original-Bedienungsanleitung FUXTEC CTL900_de_en_fr_ ita_es_rev04
_________________________________________________________________________________
3.4 Adjusting the push handle and pull bar
3.5 Moving the wagon
Step 1:
Press both buttons on the push bar
at the same time to adjust the angle.
The handle can lock in different
positions.
Step 2:
To use the telescopic pull bar,
simply pull it out of the frame holder
by the handle.
Use the rear push handle to push
the wagon along paved paths. In
more difficult terrain, please use the
telescopic pull bar at the front end
of the wagon.
27