Publicidad
Assembly
Shaft connection
• Place the equipment on the ground as shown in the image.
• Insert the shaft (A) into the shock absorber (B) and the
shock absorber into the auger (C).
Note: Align the arrow hole with that of the shock absorber
and the shock absorber with that of the auger.
• To secure the connection between the shaft and the shock
C
absorber, insert the quick-change auger pin ( F') through the
holes.
F
• To secure the shock absorber and the auger connection,
insert the quick-change auger pin (F) through the holes.
B
A
F'
B
A
F
F'
F
7
ENGLISH
Publicidad
