Publicidad
• Do not punch or knock the machine.
• Avoid inserting hard objects into the lamp head.
• Always use a soft cloth or cotton dipped in alcohol to gently wipe the tube
and reflector to keep clean (Note: Be sure to unplug the power supply and
cool down after wiping need to be after twenty minutes, until the alcohol
evaporates completely before starting the lamp, otherwise the lamp is easy
to burst!)
• When moving the machine, pay attention to the potholes to avoid
overturning.
• The machine must be connected to the ground wire to ensure safety. The
grounding machine must be connected to an outlet installed under proper
guidelines. Do not change or convert the ground connection. Do not use
any outlet converter. In case of uncertainty, have the grounding checked for
correctness by a professional electrician.
• Always ensure good grounding to avoid electric shock.
• Remove objects from the front of the lamp head before switching on the
machine.
• Keep at least 4 meters away from the paint spraying location when the
unit is turned on.
• If the lamp does not light up after power is on, the socket may be loose.
• To avoid accidents caused by clutter and dim light, please keep the place
clean and well-lit.
• Avoid using the machine in rainy and wet areas. Water ingress may cause
electric shock or damage to the machine.
• If the machine is to be used outdoors, use a special outdoor cord marked
with "W-A" or "W" to prevent electric shock.
• Avoid touching your body to a grounded surface to increase the possibility
of electric shock.
• Replace damaged cords promptly to prevent electric shock.
• Do not use the cord inappropriately. Do not move the machine by pulling
on the cord or pulling the plug from the outlet. The cord must be kept away
from too hot, oily or sharp parts and moving objects. Replace damaged
cords promptly to prevent electric shock.
- 5 -
Publicidad
