Westward 10F638 Instrucciones De Operación Y Manual De Piezas página 2

Westward Operating Instructions and Parts Manual
Parts in Carton
STEP 1：
1. Attach frames to hopper as shown using
M5x35 Wood Screws (#14).
2. Position the rate control assembly to either
frame rail based on if the spreader is
mounted to the front or the rear rack. If
mounted on front rack the control should be
80Lb. ATV Broadcast Spreader
positioned to the left rail, if mounted on the
rear rack the control should be positioned on
the right rail.
2
10F638