Publicidad
Idiomas disponibles
Idiomas disponibles
Completely read through the operating
instructions as well as the latest informa-
tion under the internet link at the end of
!
these instructions. Follow the instructions
they contain. This document must be kept
in a safe place and passed on together with
the device.
Intended use
The electronic screwdriver is intended for screwing in
and loosening screws. The USB interface on the device
and the USB cable included in the delivery scope are
available for charging the lithium ion batteries.
General safety instructions
– Risk of accident: Keep the working areas clean and
well lit.
– Risk of fire/explosion: Not suitable for working areas
that present a risk of explosion (flammable liquids,
gases, dusts).
– Risk of accident: Loss of control due to distraction
during use, e.g., due to children/people in the work-
ing area.
– Risk of accident and injury: Personal Safety
– A lack of attention when working with the device
as well as tiredness/influence of drugs, alcohol or
medication increase the risk.
– Personal protective equipment (safety goggles,
dust mask, non-slip safety shoes, protective helmet,
hearing protection), depending on the type of use,
reduces the risk of injury.
– Noise emission values determined in line with EN
62841-2-2.
– The A-evaluated sound pressure level of the electric
tool is typically less than 70 dB(A).
– The noise level when working may exceed the stated
values.
– Wear hearing protection!
– Total vibration values ah (vector sum of three direc-
tions) and uncertainty K determined according to
EN 62841-2-2:
– Screws: ah < 0.9 m/s2, K=1.5 m/s2
– The stated vibration level and noise emission value
have been determined according to standardised
measuring methods and can be used for the com-
parison of electrical tools.
– The values are suitable for a provisional assessment
of the vibration and noise emissions for well-main-
tained devices in the main use.
09
EN
Publicidad
