Diivoo WT-07W Manual Del Usuario página 6

seconds, check the settings and retry, or switch
the pairing method into the AP pairing。(hub
short press button, app click "Switch mode"，
Also ensure that the flashing light pattern is
consistent with the assigned pattern)
2-3、Hub matching method 2: AP networking
Make sure the indicator light flashes slowly
(short press the button to switch the flashing
mode)
Matching order: "+" (Home) → "socket hub"
→ Set WIFI information with correct WIFI
password → Switch the pairing mode（
Switch mode） → Connect the phone to
HomGar_xxx Hotspot → Set the device name
3
Adding a valve
3-1. Put batteries in the valve and connect it to water
pipe, press and hold the button on the valve for 5-10 sec
until red light flashes to enter pairing mode.
Note: make sure the water value is closed
3-2.Pairing steps："+"to enter main page→ select
"1-zone water timer"→"Next"→Pair your device→
complete.
Note: If the network pairing fails within 120
4