nedis SAS-TRANS62/U Manual De Uso página 6

User instructions:
1. Insert an SD card in the SD card slot of the monitor. Or connect an external hard disk
drive to the USB port of the monitor.
2. Press the power on/off button for about 2 seconds to power on the monitor. The power
indicator should light up and the picture appear.
3. For systems settings press the menu button to open the main menu. The following screen
should appear. Use the navigate, OK and menu buttons to navigate through the menu.
4. Only for SAS-TRANS62 / U: Main menu is slightly different. Please refer for specific remote
viewing functionality to the SAS-TRANS62 / U QIG
System
1. Press OK to enter the system settings. The system offers the following options:
Date/Time
Language
Record Mode
Format SD/USB
Storage for Recording
Display Items
Set the time and date.
Set the language.
Set to stop recording or overwrite the first video record when
the storage medium is full.
Set to format the storage medium.
Set the storage medium.
Set to display RSSI, Time, SD/USB status and camera on the
screen and the recorded video.
6
ENGLISH