NICREW C10 24/7 LED Manual De Instrucciones página 6

Custom 24/7 Se�ngs Quick Start
Before se�ng, ensure that the light is in 24/7 mode.
(LED indicator is solid green)
• Long press 24/7 bu�on for 3 seconds, the indicator will flash red.
• Press �me slot you would like to edit. Once selected, use color
pad to adjust colora�on and se�ng.
• Repeat step 2 un�l desired colora�ons and intensi�es are to
your liking in all �me slots.
• When finished, long press 24/7 bu�on for 3 seconds to save.
The indicator returns to solid green.
NOTE: If no bu�ons are pressed within 30 seconds, the light will
exit custom setup and return to 24/7 mode. The programs will
not be saved.
Remote Troubleshoo�ng
• Remove protec�ve ba�ery plas�c from remote. If remote
remains unresponsive, open ba�ery compartment and repo-
si�on ba�ery.
• Check remote's IR sensor.
Tips: Camera phones or digital cameras with infrared filtering
cannot be used for to check sensor func�onality. Some smart
phones use infrared filtering. Try using the front-facing camera
if you find your phone uses infrared filtering.
• Point the camera at the remote sensor so that it is displayed
in the LCD of the camera.
• Adjust the camera angle and posi�on un�l you can see pulses
of lights in the LCD display when pressing the remote's bu�ons.
If the lights are visible, the remote is working.
If the lights are not visible, the remote will need to be replaced.
English