NICREW Power Vac Plus Manual De Instrucciones página 5

English
• Insert the unit in aquarium and turn it on. Move the cleaner gently back and forth
along the bo�om of the aquarium. You can use the telescopic pipe
to any height.
• Work gravel cleaner so that a con�nuous flow of gravel is picked up and returned
to the bo�om, moving to new areas as water changes from cloudy to clear.
Cloudy Water
It's normal for your water to appear "not so clear" a�er a gravel vacuum and
everything has been s�rred. It should clear within 24 hours or less with good
filtra�on. If you have live plants, we suggest that you vacuum very gently over the
top of the gravel. If you have large ornaments, please remove them from �me to
�me and again vacuum lightly.
Fish Waste Remover: For complete aquarium maintenance
• Connect duckbill suc�on nozzle
• Insert the unit in aquarium and turn it on. The system will suck fish waste into
filter element while filtering out the water.
Water Changer: Eliminate waste inside your aquarium
• Remove the sponge filter element and connect water outlet
connect one end of hose to the unit as fig. 3 shows. Ensure the other end of
the hose is placed inside a bucket.
• Insert the unit in aquarium and turn it on. Siphon ac�on will automa�cally start.
(1): Rubber washers included
Tips
• Use rubber washers (1) to help prevent leaking water by providing a posi�ve
seal.
• Cord clamps are used to fixate the power cord on the extension tube.
• The flow rate can be adjusted with the Flow Adjustment Valve.
• If the pump impeller in this cleaner is clogged with debris, please unplug and
take out the device, loosen the impeller nut and pull the impeller cover out,
then you can clean debris from inside.
• A�er using in marine water thoroughly rinse out the cleaner with tap water.
to the unit as fig. 2 shows.
⑩
to adjust
④
to the unit. Then
⑯