Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Free Standing Installation
Fitting between existing carbinets
The height of the dishwasher, 845 mm, has been designed in order to allow the machine to be
fitted between existing cabinets of the same height in modern fitted kitchens.
The laminated top of the machine does not require any particular care since it is heatproof,
scratchproof and stainproof.
Underneath existing work top
(When fitting beneath a work top)
In most modern fitted kitchens there is only one single work top under which cabinets
and electrical appliances are fitted. In this case remove the work top of the dishwasher by
unscrewing the screws under the rear edge of the top
.
a
WARNING
After removing the work top, the screws must be screwed
again under the rear edge of the top
b
a
a
b
b
15
EN
Publicidad
