GYS TOPARC MONOPOINT QUICK FIX Manual Del Usuario página 8

User manual
PERSONAL PROTECTION AND PROTECTION OF OTHERS
Resistance welding can be dangerous and cause serious injury or death. It is intended for use by qualified personnel who have received appropriate
training in the use of the machine (e.g. bodybuilder training).
Welding exposes people to a dangerous source of heat, sparks, electromagnetic fields (take care if you have a pacemaker), risk of electrocution, noise
and gaseous emissions.
To protect yourself and others, follow the safety instructions below:
To protect yourself from burns and radiation, wear cuffless, insulating, dry, fireproof clothing in good condition that covers the
whole body.
Use gloves that guarantee electrical and thermal insulation.
Use welding protection and/or a welding bonnet with a sufficient level of protection (variable depending on the application). Protect
your eyes during cleaning operations. Contact lenses are particularly forbidden.
It is sometimes necessary to delimit areas with fireproof curtains to protect the area from splashes and incandescent waste.
Inform people in the welding area to wear appropriate clothing to protect themselves.
Use noise-cancelling headphones if the welding process reaches a noise level above the authorised limit (the same applies to anyone
in the welding area).
Keep hands, hair and clothing away from moving parts (fan, electrodes, etc.).
The manufacturer cannot be held responsible in the event of an accident.
Parts which have just been welded are hot and can cause burns when handled. When servicing the gun, make sure it is sufficiently
cold by waiting at least 10 minutes before servicing. The cooling unit must be switched on when using water-cooled pliers to ensure
that the liquid cannot cause burns.
It is important to secure the work area before leaving it in order to protect people and property.
8
Original leaflet
QUICK FIX SINGLE-POINT GUN KIT