Descargar Imprimir esta página

Edenwood PARTY400 FIRE Instrucciones De Uso página 27

Publicidad

Idiomas disponibles

Idiomas disponibles

B
Product usage
NOTE:
Make sure the volume is turned up on both the speaker and the external
device it is connected to.
If you stop play and/or unplug an audio device and then start or plug it in
again, it will resume play from where it left off.
4.
To control playback of the audio, you can either use your external device's controls (if
available), or you can use the following buttons on the speaker:
Button
Mode
All modes
VOL +/VOL -
BT/USB/FM
BT/USB/FM
BASS
BT/USB/AUX IN
BT/USB/AUX IN
NOTE: In AUX IN mode, use the external device's controls unless the playback
function is specified in the table above.
5.
Press the POWER switch to the off position (O) to turn off the speaker. A sound prompt
will play and the lights on the speaker will turn off.
FM Radio
Press and hold the
display on the screen, for example 91.4.
Press and hold the
Once the stations (channels) have been saved and when you are in FM radio mode, press
and hold the VOL +/VOL - buttons skip to the next or previous station (channel). The number
of the stored station (channel) will show on the screen, for example CH 01.
Action
Press to increase/decrease the volume.
Press and hold to go to the next/previous track/
file or station (channel).
Press to play or pause the track/file or station
(channel).
NOTE: When the music is paused, PAUS will
display on the screen in all modes except BT
mode.
Press to turn the bass on or off.
Press repeatedly to select one of the following
sound settings:
NOR - Normal
POP – Pop
ROC – Rock
JAZ – Jazz
CLA – Classical
CUT – Country
button repeatedly to select the FM radio mode. The frequency will
button to automatically scan and store radio stations (channels).
25
EN

Publicidad

loading

Productos relacionados para Edenwood PARTY400 FIRE

Este manual también es adecuado para:

975629