Publicidad
Enlaces rápidos
APT-150-01
APT-250-01
Parts List
x4
M6x16mm
60617
x4
M4x10 mm
60402
Choose Appropriate Seal
M8 Fasteners (Not Supplied)
4x
64000
4x
Forward
ø50mm (2")
x1
Cable Grommet
101819
x1
Blanking Plug
101816
Radome
60402
4x
DS30 Shell
29-05-15 Issue 1
x8
M8 Nylon Insulator
64000
x1
Foam Seal
19021
Installation Instructions
Aluminium PowerTower
Tools Required
Hole Saw
ø50-52mm (2")
Power drill
ø8.5mm (21/64") Drill Bit
No. 2 Posidriv Screwdriver
Parts Required
External cable routing option.
*Use weather seal*
101816
101819
19021
M8 x 25mm+
x4
®
Publicidad
Manuales relacionados para Scanstrut PowerTowers APT-250-01
Resumen de contenidos para Scanstrut PowerTowers APT-250-01
- Página 1 Installation Instructions APT-150-01 29-05-15 Issue 1 APT-250-01 Aluminium PowerTower Tools Required Parts List Hole Saw M6x16mm Cable Grommet M8 Nylon Insulator ø50-52mm (2”) Power drill ø8.5mm (21/64”) Drill Bit 60617 101819 64000 M4x10 mm Blanking Plug Foam Seal No. 2 Posidriv Screwdriver Parts Required M8 x 25mm+ 101816...
- Página 2 IMPORTANT PowerTowers are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change without prior notice. Use of the Power Towers with unapproved products, or overloading, invalidates any product warranty. Scanstrut does not supply fastenings to fix this product to the chosen surface. Please choose suitable fastenings for this purpose.