Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK START GUIDE
MW CONNECT™ APP
Allows you to control your Bluetooth®
enabled garment with your mobile device.
This product controls the operation of the product through
the APP on the mobile phone.
1. The phone downloads the
connection software.
2-1. If you are using an iPhone, search for MW connect in
the appstore and download the software: After
downloading the software, open the software and the
dialog box "MW CONNECT ™" pops up. If you want to use
Bluetooth, click the OK option in the dialog box, And
then click Finish
2-2. For Android, please download and install the
installation package provided. After downloading, enter
the App interface and click "Allow Access to Location
Services" button. In the new dialog box, click" Allow in use
only ".
7
fieldsheer.com
OK
ALLOW
Stay Warm, Stay Comfortable
TM
3. Fully charge your battery to 100%.
4. Open the battery pocket located on the
Cuff of the Socks and plug the battery(s)
into the wire harness.
5、Find the cable with the DC
port on the sock and plug the
cable into the DC port of the
battery, turn on the battery
switch until the LED light is on,
at which point the clothing will
slowly heat up.
6. Available Heated Garments will appear in the app.
Select
connect button on screen.
7. Bluetooth Pairing – A Bluetooth pairing screen will appear.
Press Continue to start Bluetooth pairing.
QUICK START GUIDE
100%
75%
50%
25%
MW37V036
2S
100%
8
Publicidad
