Descargar Imprimir esta página

FUXTEC FX-E2KS Manual De Instrucciones página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Original manual FUXTEC FX-E2KS rev01
Introduction and safety
Never allow children or persons unfamiliar with these instructions to use the garden device. Children
should be supervised to ensure that they do not play with the appliance.
Intended use
This appliance is intended exclusively for sawing wood and felling trees in private homes. It is not
suitable for sawing plastic, masonry or building materials other than wood.
The device to be used in accordance with the descriptions and safety information provided in this
manual. Any other use is not intended. Any other use is not in accordance with the intended purpose
and will invalidate the warranty and result in the rejection of any responsibility on the part of the
manufacturer. The user is liable for all damage to third parties and their property. Operate the device
only in the technical condition specified and delivered by the manufacturer. Unauthorized
modifications to the device preclude the manufacturer's liability for any resulting damage.
General safety instructions for power tools
WARNING!
Read all safety information and instructions. Failure to follow the safety information and instructions
may result in electric shock, fire and/or serious injury.
Keep all safety information and instructions for future reference.
The term power tool used in the safety information refers to power tools that operate on mains
power (with power cord) and battery-powered power tools (without power cord).
Workplace safety
- Keep your work area clean and well lit. Clutter or unlit work areas can lead to accidents.
- Do not work with the power tool in a potentially explosive environment containing flammable
liquids, gases or dust. Power tools generate sparks that can ignite the dust or vapours.
- Keep children and other persons away from the power tool throughout its use. If distracted, you
may lose control of the device.
Electrical safety
- Keep power tools away from rain or wet conditions. Water entering a power tool increases the risk
of electric shock.
- Do not use the cord to carry or hang the power tool or to unplug the power tool from the wall
outlet. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
25

Publicidad

loading