nedis WIFIDS20WT Guia De Inicio Rapido página 11

•
Keep cells and batteries clean and dry.
•
Retain the original product literature for future reference.
•
Battery usage by children should be supervised.
•
Dispose of the cell or battery properly.
•
Seek medical advice immediately if a cell or a battery has been swallowed.
Installing the battery
1. Turn the alarm A
2. Insert the battery A
the battery polarity (+/-) matches the polarity markings inside the battery
compartment.
3. Turn the alarm A
4. Test the product.
-
Constant exposure to high or low humidity may reduce battery life.
Choosing a location (image B)
For the highest safety, it is recommended to install the product in areas with a
source of combustion where smoke can be detected as quickly as possible.
The product should be installed in:
•
Every sleeping area.
•
Both ends of a hallway longer than 12 m.
•
Every room where a furnace, a heat source and/or other burning devices are
located.
•
Every room where multiple people spend several consecutive hours.
•
Install at least one product on each floor of a multi-level home.
In areas with a source of combustion:
•
On the ceiling, at least 50 cm away from surrounding walls.
•
At a central point in the room.
•
Not in turbulent air (near windows, ceiling fans or air conditioners).
counter clockwise to remove it from the bracket A
1
into the battery compartment A
6
1 clockwise to attach it to the bracket A
11
5
4 . Make sure that
5
.
.