Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Adjust Color
Troubleshooting
1. APP can't scan the device
·Ensure the string lights are powered on.
·Confirm Bluetooth on your smartphone is enabled.
·Position your smartphone close to the control box, then try again
·If it still fails to scan, press and hold the button for 5 seconds, white
light flashing and try again.
2. Can't connect to WiFi
·Confirm your home WiFi is 2.4GHz and you entered the correct password during the connection.
·Position your smartphone close to the control box
· Press and hold the button for 5 seconds, re-add the device after the light starts to flash.
3. Some of the bulbs do not work
Unplug the adapter, then plug it in again.
If the problem persists, please contact Customer Service
:
After selecting, click on the color wheel to
adjust the whole string of lights to the same color.
:
After selection, click on the color wheel, then
click on the light bulb, you can apply the color to
the selected light bulb.
:
After selection, click on the light bulb to turn
off the light of the selected light bulb.
03
Publicidad
