Publicidad
Idiomas disponibles
Idiomas disponibles
Part 4
Step. 1
Firmly grasp both
sides of the door at
the top.
Step. 2
With the door at the
same angle as the
removal position,
seat the indentation
of the hinge arm into
the bottom edge of
the hinge slot. The
notch in the hinge arm must be fully seated into the
bottom of the slot.
Step. 3
Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge
of the slot.
2
ASSEMBLING THE BOTTOM DECORATIVE TRIM
Bottom decorative trim
a
• After installing the oven in the cabinet, assemble bottom decorative trim with 2 screws
INSTALL THE OVEN
Hinge arm
Indentation
Step. 4
Push the hinge locks up
against the front frame of
the oven cavity to the locked
position.
Step. 5
Close the oven door.
Bottom
edge of
NOTE
slot
• When you install the oven
door, be careful not to bump
the bottom vent trim.
• Keep oven vents
unobstructed. Replace
the bottom vent trim if it
becomes bent or deformed. Never block the vent
with plastic or heat-sensitive items.
- 12 -
Hinge arm
Hinge lock
Bottom
vent trim
(4X10).
b
Publicidad
