Publicidad
STEP 7
Carefully turn the unit over on its front side. Position the back panel as shown with the notch
in the back panel over the safety bracket (11).
Assure that the unit is square. Distance from corner to corner must be equal. Align squarely
and nail straight into back edges.
10
B
ameriwoodhome.com
10
IMPORTANT! THE BACK PANEL IS A STRUCTURAL
PART OF THIS UNIT AND MUST BE INSTALLED
PROPERLY.
(x34)
BACK
PNL
E
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
14
Publicidad
