Publicidad
Idiomas disponibles
Idiomas disponibles
Getting Started
1
Turn the ignition key of your car to ACC.
The unit is turned on, please read the warning and
press "Agree" to enter the screen.
2
Press the <8MENU> button.
3
Touch [
].
4
Touch the corresponding key and set the value.
[System]
[Beep Tone]
Activates or deactivates the key-touch tone.
"ON" (Default), "OFF"
[Language]
Select the language used for the control screen
and setting items. Default is "English".
[Time/Date]
Adjust the clock time. (P.3)
[Clock Mode]
Select the time display format.
[12hr] (Default) / [24hr]
[Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position. Default is "ON".
[Guidelines SETUP]
If you select [ON] for [Parking Guidelines], you can
adjust the parking guidelines. See To adjust the
parking guidelines (P.8)
.
[Reverse with ATT (-20dB)]
When the gear is shifted to the reverse (R)
position, the volume of the device is adjusted.
Default is "ON". See To adjust the Reverse with
ATT (P.8).
[System Reset]
Touch [System Reset] and then touch [YES] to set
all the settings to the initial default settings.
[Bluetooth]
Displays the Bluetooth Settings screen. (P.9)
[Screen]
[Dimmer]
Select the dimmer mode.
"High" (Default) / "Mid" / "Low"
[Demo]
Select the demonstration mode. Default is "ON".
[Information]
Displays the software version and model number
of this unit
5
Touch [6].
Clock settings
Ñ Synchronizing the clock time with FM
RBDS
Activate [RBDS Clock Sync].
See Radio Setup (P.5).
Ñ Adjusting the clock manually
✎
NOTE
• Deactivate [RBDS Clock Sync] before adjusting the
clock.
1
Press the <8MENU> button.
2
Touch [
].
3
Touch [System].
4
Touch [Time/Date].
Clock screen appears.
5
Touch [R] or [S] to set the clock time.
6
Touch [6].
English |
3
Publicidad
