Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations with the purchase
of your Valentino
1.
PRODUCT DESCRIPTION
Valentino is a high quality battery operated
electronic code lock with aluminium housing.
Valentino's energy efficient design makes it very
easy to equip any gate with access control, with a
minimal need for maintenance.
Both sides of the Valentino are equipped with a
weather protected illuminated electronic code
panel. Using these code panels, PIN codes can
be easily added, modified or removed. Up to 100
codes can be programmed. Different codes can
be used for entry and exit, and the system also
supports permanently open codes.
Valentino supports the use of a pushbar, free-exit
and code controlled handles.
2.
PROGRAMMING
2.1 ACCESS PROGRAMMING MODE
Valentino offers 2 alternative methods to enter the
programming menu: by using the Master PIN code
(default value '12345'), or by using the key contact:
• Press [#] for 5 sec, [#] will start flashing
• Either enter the Master PIN code, and press [#],
or turn and hold the key contact in the locking
direction for a duration of 2 seconds
• If a wrong Master PIN is entered, the
programming mode ends and time out procedure
as described in 4.2 applies
For safety reasons we strongly recommend to
change the Master PIN upon first use
If only [#] is lit, you are in the main menu of the
programming mode
2023-03-17 Rev 03 - Valentino
• Select a menu and confirm with [#]. The following
menus are available:
[9] setup Master PIN
[1] manage PIN codes
[2] manage permanently open codes
[3] setup switching duration
[4] setup free exit mode
[5] setup lighting mode
[0] factory reset
See next paragraphs for detailed information
The programming mode ends automatically
when there is no activity for 60 seconds
• After selecting a menu, it's possible to return to the
main menu by pressing the [C] key
• Press [C] for 5 seconds to exit the programming
mode
2.2 SETUP MASTER PIN [9]
• Access programming mode (see 2.1)
• Press [9] and confirm with [#]
• [9] and [#] are both lit
• The default Master PIN is 12345. It always has to
be a 5-digit code
• Enter a new 5-digit Master PIN and press [#]
• Repeat previous step to confirm the new
Master PIN
• If both codes are equal, all LEDs will light briefly
and you will return to the main menu of the
programming mode
EN
6
Publicidad
