MSG Equipment MS00180 Manual De Usuario página 4

English
Special wrench MS00180
The MSG Equipment special tool is designed for the high-quality disassembly and assembly of
individual components and assemblies of a vehicle. The special tool MS00180 is used in the
process of repairing the steering BW413.NLR0.R(BW118R) and BW416.NLF0.R(BW122R), which is
installed on the following vehicles:
MINI
(F55) 14-...
•
(F56) 13-...
•
Cabriolet (F57) 14-..
•
BMW
i3 (I01) 13-
•
The MS00180 wrench allows you to loosen/tighten the side tightening nut, ensuring its integrity
for future use.
2. INSTRUCTIONS FOR THE USE OF SPECIAL TOOLS
1. Always use the special tool for the work for which it is intended and only with the unit for
which it was designed.
2. When working with the special tool, follow general safety and accident prevention
requirements.
3. For proper and safe use of the special tool, it is prohibited to:
• apply impact loads;
• heat the tool above 250°С.
WARNING! The manufacturer is not responsible for any damage or injury to human health
resulting from non-compliance with the requirements of this manual.
4
1. APPLICATION