Publicidad
Idiomas disponibles
Idiomas disponibles
Warranty
.........................................
2
Safety
Rules ......................................
2
Operation
......................................
2-4
Maintenance
.....................................
4
Troubleshooting
...................................
5
Parts
Illustration
and List ..........................
6-7
FULL
ONE
YEAR
WARRANTY
ON
CRAFTSMAN
AIR-DRIVE
TOOLS
If this product
fails due to a defect
in material
or workmanship
within
one year from the date
of purchase,
Sears
will at its
option
repair
or replace
it free of charge.
Contact
your
nearest
Sears
Service
Center
(1-800-4-MY-HOME)
to arrange
for
product
repair,
or return
this product
to place of purchase
for
replacement.
If this product
is used for commercial
or rental
purposes,
this
warranty
will apply for 90 days from the date of purchase.
This warranty
applies
only while this product
is used in the
United
States.
This warranty
gives you specific
legal rights
and you may also
have other rights which
vary from state to state.
Sears,
Roebuck
and Co., Dept.
817WA,
Hoffman
Estates,
IL 60179
.,
Air tool operators
and all others
in work area should
always
wear
safety goggles
complying
with United
States
ANSI
Z87.1
to prevent
eye injury from fasteners
and flying
debris
when
loading,
operating
or unloading
this tool.
*
Never exceed
operating
pressure
of 100 PSI.
*
Always
keep hands
and body away from the fastener
dis-
charge
area when
air supply
is connected
to tool.
*
Always
disconnect
tool from air supply
when servicing
or
adjusting
tool and when
tool is not in use.
*
Do not operate
when
contact
trip is not in contact
with
work.
*
Never load the tool until you are ready
to use it.
*
Never depress
tool trigger
when
loading.
*
Always
load with nose of tool pointing
away from you and
others.
*
Never point tool at yourself
or others.
*
Never carry
tool with trigger
depressed.
*
Do not use oxygen,
combustible
gas or high pressure
compressed
gas as the air supply
for the tool.
*
Always
use tool at safe distance
from other people
in work
area.
*
Use only air tool lubricants.
*
Do not attempt
to discharge
fastener
into hard or brittle
materials
such as concrete,
steel or tile.
*
Do not connect
female
quick-connect
coupling
to tool side
of air line.
*
Connect
male,
free-flow
nipple to tool side of air line so
that tool is depressurized
when
hose is disconnected.
,,
Do not use a hose swivel
with this tool.
,,
Use Craftsman
recommended
fasteners.
DESCRIPTION
The Craftsman
Combination
Finish
Nailer/Stapler
drives
16
gauge
finish
nails from 3/4" to 2" long and 18 gauge
I/4" crown
staples
from 3/4to 1I/2 '' long. Die cast aluminum
body with tex-
tured cushioned
grip minimizes
operator
fatigue.
Large
capaci-
ty, top loading
magazine
makes
loading
easy. Safety feature
disables
tool unless
contact
trip is pressed
against
workpiece.
Tapered
nosepiece
provides
operator
with greater
visibility
for
precise
fastener
placement.
Rigid nosepiece
reduces
jamming.
Quick release
nose cover allows
easy access
to jammed
fas-
teners.
Adjustment
knob controls
depth
of fastener.
Air deflec-
tor can be adjusted
to any direction.
The Combination
Finish
Nailer/Stapler
is excellent
for window
and door trim, exterior
trim, baseboards,
molding,
cabinetry,
paneling,
shelving
and
furniture
making.
SPECIFICATIONS
Capacity
..................
100 finish
nails or 150 staples
Fastener
size ..............
16 gauge
(.062"
x .052")
nails
18 gauge
(.049"
x .040")
staples
Nail lengths
..................................
3/4to 2"
Staple
lengths
..............................
3/4to 1 _/2"
Operating
pressure
........................
60-100
PSI
Air inlet ....................................
W' N.P.T.
Length
........................................
12"
Height
.......................................
10VZ'
Width
..........................................
3"
Weight
.....................................
3.8 Ibs.
FINISH
NAILS
18345
....................
16 gauge
finish
nails,
3/4" long
18344
...................
16 gauge
finish
nails,
1V4" long
18346
...................
16 gauge
finish
nails,
1W' long
18347
....................
16 gauge
finish
nails,
2" long
STAPLES
18334
.....................
18 gauge,
V4" crown,
3/4" long
18336
.....................
18 gauge,
W' crown,
7/8" long
18371
.....................
18 gauge,
V4" crown,
1" long
18372
....................
18 gauge,
V4" crown,
1W' long
18373
....................
18 gauge,
V4" crown,
1V4" long
18374
....................
18 gauge,
V4" crown,
1W' long
AIR
SUPPLY
LINE
Refer to Figure
1 (page 3).
•
The air tool operates
on compressed
air at pressures
from
60 to 100 PSI.
"
Never exceed
maximum
pressure.
Air Delivery
Required:
1.41 SCFM
@ 90 PSI
(30 shots
per minute).
WARNING:
Keep
hands
and body away from discharge
area
of tool when
connecting
air supply.
Always
disconnect
tool
from air supply
when servicing
or adjusting
tool and when tool
is not in use.
© Sears, Roebuck and Co.
2
Publicidad
