Mixx HTG01 Guía Básica página 3

The Portable Charging Case
To check the battery status of the case, open the lid of the Portable
Charging Case [5] . The LED Digital Display [7] will show the 5
percentage of the battery remaining [B] for 30 seconds.
You can charge the case in two ways:
1. With a Type C charging cable
Always connect the case to a suitable USB wall charger, computer
USB port or a power bank using the USB Type C charging cable [9]
supplied. Plug the supplied cable into the USB C port [6] on the
charge case.
When the LED Digital Display number [B] reaches 100 (i.e., 100%) the
case is fully charged, and the display will switch off.
2. Qi wireless charging
At the base of the case is a Qi wireless charge surface [8] . Place the
case flat on a Qi Wireless Charger (sold separately).
When the LED Digital Display number reaches 100 (i.e., 100%) the case
is fully charged, and the display will switch off.
Charging the case may take up to 2 hours.
LET'S CONNECT
First time pairing
When you open the Portable Charging Case [5] both earbuds will
turn on and connect together. A voice prompt will confirm with 'Power
on, pairing'. One Earbud LED Light [3] will flash RED and BLUE to
indicate pairing mode.
Go to the Bluetooth settings on your audio device to select 'MIXX
StreamBuds Sports Charge 2' from the list. Once paired successfully
you will hear 'Connected' and the Earbud LED Lights [3] will turn off.
Placing both earbuds back in the Portable Charging Case (5) and
closing the lid will power them off. (note – if the earbuds do not turn
off, the battery in your charging case needs to be recharged – see 'Let's
Stay Charged'.)
You can now enjoy your music, watch a video or take a call hands free.
The earbuds will automatically reconnect to the last device they were
paired with, confirming 'Connected'.
7
B
B
5
3
2
9
6
8
3
5
[EN]