LUMIT DALTON A19364009S Manual De Instrucciones página 8

INSTRUCTION MANUAL
DALTON
REF. A19364009S
ESPECIFICAÇÕES
| ESPECIFICACIONES | SPECIFICATIONS
Qt. Luz (Lúmens) 6000lm
Lumens
Potência 40W
Potencia | Power
LEDs SMD2835*90PCS
Bateria
32700/12000mAh/9,6V
battery
115.2Wh
Painel Solar
21W/13.5V
Solar Panel
Sensor PIR 120º / 8-12m (dist. deteção) |
distancia detección | detection distance
Índice Proteção IP65
Temperatura
-20º a 60ºC
funcionamento
ON/OFF/Switch working mode
1. Press the button for the first time, the luminaire enters A Mode.
2. Press the button for the second time, the lamp enters B Mode.
3. Press the button for the third time, the lamp goes out.
COMMAND:
First press the lamp button to activate it, then use the control to
adjust the operating mode.
after 4h
A - PERMANENT LIGHT MODE
_____________________________________________________________________________
Press the button on the lamp for the 1st time or the button
the control, the lamp will automatically turn on at night and
maintain constant 60% brightness for 4 hours (motion detection is
invalid), then it will switch to Sensor Mode B.
NOTES:
Above working modes are factory default settings, user can re-set it to: press button on the lamp 1st time for mode B and press 2nd time
for mode A, meanwhile also can select different working time or brightness by remote control, after which it will automatically become the
latest default working mode.
Mode A and Mode B cannot be set to the Constant Lighting Mode at the same time, nor can they be set to the Sensor Mode at the same
time.
The lamp has memory function. After lamp restarted, it will continue to work in the latest default working mode.
Ângulo
Ángulo | Detection
Potência Equivalente
Potencia Equi. | Equivalent Power
Altura de Instalação
Altura de instalación | Installation Height
Área Iluminada
Lighting Area
Material
Dimensão
Dimensiones | Size
Temperatura Armazenamento
Tempo de Carregamento
Tiempo de Carga | Charging Time
B - SENSOR MODE
_____________________________________________________________________________
on Press the button on the lamp a second time or the button
the remote, the lamp will automatically turn on at 100% brightness
when motion is detected in the range ≤ 12 mtrs and then change
to dim brightness (30% brightness) after 20 seconds without
movement.
140x70º
400W
3-6m
100m2 (altura 4m)
(height 4m)
180m2 (altura 6m)
(height 6m)
ABS+PC + Alumínio, Anti-UV
Aluminium, Anti-UV
706,1 x 289,7 x 73,6mm
8-10h/ (sol forte para carregar totalmente)
(sol fuerte para cargar completamente) | (fully charged
under strong sunshine)
[ EN ]
on
5