Descargar Imprimir esta página

Mx Onda MX-PG2204XE Manual De Usuario E Instalacion página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

c) If you are going to make prolonged and continuous use of the gas hob, we
recommend that you increase the ventilation system of the room where the
gas hob is installed.
Gas hob location or place
The gas hob is designed to withstand high temperatures, so it can be installed
on top of the oven (leaving a small gap to facilitate ventilation of the oven
itself).
For correct installation and ventilation, the minimum distances between the gas
plate and the different pieces of furniture and/or electrical appliances must be
respected, follow the following recommendations:
a) The plate can be installed in any room,
as long as it has sufficient ventilation
and does not have excess humidity.
b) A lateral separation of at least 150 mm
must be left between the hob and the
nearest piece of furniture or appliance
c) The height from the gas hob to the
furniture must be at least 400 mm high.
d) The height from the gas hob to the hood
must be at least 650 - 700 mm high.
e) On the back of the gas hob, a gap of at
least 60 mm must be left between the
hob and the wall, to facilitate the
connection and handling of the hob's
gas outlet.
f)
Before attaching the gas hob, you need
to stick the sealing gasket (supplied) to
the bottom of the gas hob.
g) The fixing accessories (hooks and screws supplied) are used to fix the gas
hob on a countertop that is between 20 and 40 mm thick. The following
illustrations show the steps for assembling and fixing the gas hob to the
worktop.
Minimum recommended measures
for the installation of the gas hob.
10

Publicidad

loading