Symbols original instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or
cause damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults in the
machine.
User information. This information helps you to use
all the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly
and operating instruction sheet for refer-
ences to figure numbers in the text.
Symbols machine
Carefully read operator
the machine. Observe instructions and safety
rules when operating.
Shut off engine and remove power cord be-fore
performing cleaning, maintenance or repair work.
–
Danger
objects may be thrown out at high
speed when motor is running.
Keep people, pets and domestic animals out of
the danger area.
Beware of the rotating tool.
Keep hands and feet out of openings while ma-
chine is running.
Immediately disconnect the mains plug when the
cable is damaged or entangled.
Do not touch the cable until it is disconnected from
the mains.
Protect against moisture.
Wear ear protection.
Wear eye protection.
Position "Suction and Shredding".
The material is sucked in and shred.
Position "Blowing"
The material is blown away.
Speed regulation (infinitely variable)
MIN = 6000 rpm
MAX = 14000 rpm
12
'
s manual before handling
This product complies with European regulations
specifically applicable to it.
Machine of the protection class II
(double insulated)
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
According to the European Directive 2012/19/EU
on electrical and electronic scrap, electrical devic-
es that are no longer serviceable must be sepa-
rately collected and brought to a facility for an
environmentally compatible recycling.
Operating Times
Please consider the individual country specifications.
Information on how to avoid noise:
Some noise exposure from this machine is unavoidable.
Schedule noisy work to times during which it is allowed. Re-
spect all rest times and restrict the work duration to the mini-
mum. You as the operator and bystanders should wear a
suited hearing protection.
Proper use
The garden vac/blower/shredder is only suitable for light,
dry materials, such as leaves and garden waste such as
grass, small twigs and pieces of paper.
The vacuuming, blowing and shredding of
heavy materials, such as metal, stones, branches, fir
cones or broken glass
combustible materials such as cigarette butts, barbe-
cue coal
flammable, toxic or explosive materials
is explicitly forbidden.
Never use the machine in areas with harmful dust and
liquids or as a wet vacuuming machine, because of the
risk of physical injury.
Any other use than for vacuuming, blowing and shredding
is not allowed.
The garden vac/blower/shredder is only designed for pri-
vate use in accordance with its proper purpose.
Regarded as machine for private gardens and allotments
are those units which are not employed in public grounds,
parks, sports grounds, and in agriculture and forestry.
Every other form of use is considered improper use. The
manufacturer accepts no liability for any damages resulting
from improper use, and any risk is in this case borne solely
by the user.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by
the manufacturer and following the safety instructions in-
cluded in the instructions.
The relevant accident prevention regulations for the opera-
tion as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
Unauthorised modifications at the garden vac will exempt
the manufacturer from any liability for damages of any kind
arising from this.