Publicidad
Idiomas disponibles
Idiomas disponibles
4.5.2. When 2 pots are paused at the same time, if there are no operation
within 5 minutes. After 5 minutes, both pots will stop working and
return to standby mode;
4.5.3. During 2 pots cooking, gently press the "Pause and start buttons
key" once, the 2 pots enter the pause mode at the same time, if you
need to adjust, first press the
temperature and time according to your needs; After debugging,
press the "Pause and start buttons of key" once to resume to work
the 2 pots at the same time;
4.5.4. During 2 pots cooking, gently press "Pause and start buttons key"
once, the 2 pots will enter the pause mode at the same time, press
and hold the "Power key" again for 2 seconds, 2 pots will stop
working at the same time, the left and right screens will display
"OFF", and the product will return to the standby mode after a
prompt sound of "beep".
4.6. Stop the 2 pots
4.6.1. During 2 pots cooking, press and hold the "Power key" for 2
seconds, 2 pots will stop working at the same time, and the left
and right screens will display "OFF". After a prompt sound of
"beep", the machine will enter the standby mode.
4.6.2. There is no operation in the simultaneous cooking of 2 pots, after
the display time ends, both heating and motor will be stopped,
and the display screen displays "OFF". After the
buzzer gives out 5 prompt sounds of "beep", the display
screen is off and the machine returns to the standby mode;
4.6.3. If you want to turn off one pot of the 2 pots cooking, press
first, and then press and hold the "Power key" for 2 seconds. The
selected pot will stop working, and the corresponding display
screen will display "OFF". After a prompt sound of "Beep", it will
return to standby mode. At this point, the machine state changes
to single pot working mode.
4.7. Simultaneous end function
4.7.1. This function will be waked up only when two recipes with different
time are selected in 2 pots mode and the indicator light will be lit at
the same time. The awakened state display will flash.
4.7.2. After selecting the menu, press "Synchronous end key" firstly, press
the "Pause and start button key" again, the machine will begin to
work. At this point, the long time menu pot to work, short time pot
of the screen shows "HOLD", when the extra time has passed, the
short time pot began to work, "synchronization end key" normally it
is turned on in this process;
14
www.NutriChefKitchen.com
or
, and then adjust the recipe,
or
Publicidad
