Publicidad
Idiomas disponibles
Idiomas disponibles
English
Shaving tips and tricks
–
Wait at least 10 minutes after getting up before shaving, to
ensure your face is free of puffiness that may be present from
sleeping.
–
Always hold the shaver at a right angle to the skin so that all
three heads are touching the skin with equal pressure.
–
The use of short, circular motions in stubborn areas may obtain
a closer shave, especially along the neck and chin line.
–
Do not press hard against the skin to avoid irritation and/or
damage to the rotary heads.
–
Recommend you use your new shaver daily for up to four weeks
to allow time for your hair and skin to become accustomed to
the new shaving system.
LED Display
1. When the appliance is connected to the main power the
display is refreshed with all symbols & numbers lighted then
all shut off. After that, charging will be started with battery
symbol blinking in the display and the number increasing from
0 to 100. When the battery capacity reaches 100 it is fully
charged, the appliance will be shut off 5 minutes later. (Fig. D1)
2. The display will be refreshed when the appliance is turned on,
and the numbers showing the battery capacity will slowly be
decreased from 100 to 0 while using. A battery symbol will be
blinking when the battery capacity decreased to 10; the
appliance will be automatically shut off when decreased to 0
and can't be turned on again if it is not recharged or connected
to the main power. (Fig. D2)
3. Please clean the shaving head if the display shows for cleaning
with the symbol of a water tap. Please check the cleaning
instruction of this manual to know how to clean. (Fig. D3)
6
User Instructions
Publicidad
