AbleNet Powerlink 4 Instrucciones De Uso página 8

PowerLink 4
PREVENTATIVE AND REGULAR MAINTENANCE
Routinely check PowerLink before each use to confirm solid connection to AC
power source. Do not use PowerLink if any cord appears to be damaged. If the device
becomes wet or does not work properly, unplug the device immediately and do not
attempt to use. Contact ableCARE at (651) 294-3101.
• Do not lift the PowerLink by the power cord.
• A PowerLink may be left connected to a frequently used appliance for the user's
convenience; however, unplug the switch when not in use and note that Status
buttons will continue to function and could cause accidental activation.
• Keep the device in a cool dry place. Keep the device away from heat, direct
sunlight, and liquids. Do not store the device where it can fall or be pulled into
water.
REUSABLE
Powerlink 4 should be sent back to the manufacturer for cleaning, testing and
refurbishment before reuse with another patient.
DEVICES USED TOGETHER WITH
Compatibility
Ability to Control:
Powerlink 4 is compatible with many appliances and AC devices. Examples: Electrical
Fans, lights, and some kitchen appliances.
The Powerlink 4 controls electrical appliances by controlling the appliances power
source at the outlet.
Input:
Wired: Powerlink 4 can use any wired switch that terminates with a 3.5mm (1/8")
mono phone plug
Wireless: The PowerLink can be controlled by any AbleNet wireless* switch transmit-
ter such as the JellyBeamer®. Linked devices can access the PowerLink from up to 30
feet away without pointing or "line of sight".
Up to 8 AbleNet wireless switch transmitters can be linked to one or both sides of the
PowerLink, and will only activate sides that they are linked to.
PROPER DISPOSAL
Dispose of according to local regulations.
WHEN TO CONTACT A HEALTHCARE PROFESSIONAL
If you have difficulty accessing the switches or need assistance with product
placement.
Change in your condition.
AbleNet
Instructions for Use - PowerLink 4
Page 8 of 39