Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND
TEMPERATURE SETTING
Check the integrity of the heater and
the original packaging to ensure the
product is intact.
Ensure the JetFlush Rapid+ tank is
empty before installing the heating
system. After it has been securely
installed and the tank filled, ensure
there are no leaks. Prior to switching
on the device, ensure that there is
sufficient liquid to submerge the
heating element and temperature
probe completely.
Connecting the power cord will
cause all the LEDs on the thermostat
to flash, indicating standby status.
To switch on the heating element,
press the ON button
Two LEDs will light up, with
one blinking to indicate the set
temperature, which can be adjusted
by pressing the SET button
The static LED indicates the current
temperature of the liquid.
JetFlush Rapid+ Heater V1 09/23
Sentinel_JetFlush_Rapid_Heater_Manual_Sep23_V1_FINAL2.indd 11
Sentinel_JetFlush_Rapid_Heater_Manual_Sep23_V1_FINAL2.indd 11
Installation and temperature setting
.
.
EN
11
29/09/2023 11:15
29/09/2023 11:15
Publicidad
