Descargar Imprimir esta página

Genius FALKO GO Instrucciones De Uso página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Use
1. Press the on/off switch to determine the direction of travel (see fig. C).
D → the cart moves forwards, you can pull it
R → the cart moves backwards, you can push it
2. Grasp the handle and bring the push bar into an inclined position.
3. Release the parking brakes by pressing lightly on the two plastic „Unlock" lugs.
4. Press the start button to activate the motor assistance. Motor assistance will remain active as long as you keep the
start button pressed. As soon as you release the start button, the motor will switch to standby.
5. You can adjust the length of the push rod using the locking lever on the back of the push rod (see fig. D).
6. There is a holder on the folding frame into which you can lock the push bar when not in use (see fig. D).
Stopping and parking
1. Switch off the motor by setting the on/off switch to „0".
2. Lock both parking brakes by pressing the lower „Lock" section towards the front wheels.
3. Bring the push rod into an upright position and secure it in the holder.
4. If the cart is not in a level position (e.g. on a slight slope/incline), also secure the wheels against rolling away.
Folding
1. Remove all objects from the cart, push the push bar together and secure it in the holder.
2. Pull the loop in the centre of the fabric insert to fold up the cart.
3. The two fabric handles on the sides of the fabric insert can be joined together with the integrated Velcro fastener
to form a practical handle for carrying.
Tip:
Of course, you can also use the cart like a normal handcart without motorised assistance.
Charge the battery when the charge level falls below 25% at the latest.
For protection, the battery switches off when the charge level is low, and the motor can no longer
be used. In this case, switch off the support by setting the on/off switch to „0". Recharge the
battery promptly.
Cleaning and care
1. Set the on/off switch to „0" at the end of use.
2. Remove the battery from the folding frame.
3. If necessary, remove the fabric insert from the folding frame.
4. Clean the folding frame with a damp cloth. Do not use harsh or abrasive cleaning agents or cleaning pads.
5. The fabric insert can be washed by hand if necessary.
Disposal
(Applicable in the European Union and other European states with systems for the separate collection of waste
and recyclables).
Packaging
The packaging material can be recycled. Dispose of the packaging in an environmentally friendly way for recycling.
Instruction manual
GB
15

Publicidad

loading

Este manual también es adecuado para:

Etc-001