EN
3.2.2 Focus Adjustment
a. Press the "focus" key or follow the steps below, press the
remote control "Setting" key -> select "Projector settings" ->
select "Focus Adjustment";
b. Adjust the focus according to the screen prompts until the
screen becomes clear from blurry.
Fig. 14 Focus Adjustment
11
3.2.3 Image Adjustment
a. Press the remote control "Setting" key -> select "Projector
settings" -> select "Picture Calibration";
b. After entering the image Adjustment menu, follow the
screen prompts to correct the image through the arrow
keys on the remote control.
c. Press "Reset" to get back to the original layout.
Fig. 15 Image Adjustment