FitStream PRO Instrucciones De Uso página 19

HELPFUL HINTS
1. RED AND WHITE FLASHING LED
If blinks the red and white is lit during mixing, the motor is stuck. If the blades are
jammed, simply turn the blender upside down, shake it quickly and turn on. Then turn
it back to make your ingredients come across all 6 blades at full speed.
2. RED AND BLUE FLASHING LIGHT
Red and blue flashing light means that the bottle is poorly tightened to the base. To fix
this problem, tighten the bottle in a clockwise direction until the arrow on the bottle is
pointing to the arrow on the base. For safety reasons, the glass has magnets that must
be aligned, otherwise the blades do not spin.
3. FLASHING RED LED
When you need to recharge the FitStream, the red LED starts blinking. Charge the
blender via the USB-C power connector on the base. Use an attached USB cable with
any USB network adapter, such as one for a mobile phone. Charge for at least one
hour. When fully charged, the light turns blue.
4. NEVER OVERFILL
Never fill the FitStream with ingredients up to the top of the jar. The blender is de-
signed for mixing fruit or making mixed drinks. Not intended for chopping meat. Motor
may overheat if more than 3-5 mixing cycles directly follow each other. Allow time for
the blender to cool down before any further cycles. Please respect the performance
of a portable battery blender, it's not a "Superman mixer". However, you can take it
anywhere and enjoy your favorite fresh drink anytime!
5. FLUID LEAKAGE
In the case of leakage of the contents of the bottle, it is necessary to open the cap,
clean the silicone seal and again close the bottle cap.
WARNINGS
Follow the instructions to reduce the risk of fire,
electric shock and damage:
• Never charge the blender after cleaning while the charging USB connector is wet.
Clean and dry according to instructions.
• Do not run the device until the lid is closed tight.
• Do not run the device when empty in order to avoid damaging the blender motor.
• Never fill the device with liquid with temperature above 50°C.
• Never put the blender in the dishwasher, but follow the instructions for cleaning it.
• Because the blender is not waterproof, never submerge it or expose the charging
connector to running water.
• Use only recommended accessories. You must never repair this device yourself.
If required, please contact us. Do not throw any metal objects into the device.
• Never insert fingers into the bottle when the motor is switched on.
• Do not use a damaged electrical outlet for charging the device.
• Place the device on a dry, flat, waterproof and heat-resistant surface.
• Keep your device out of the reach of children and people with mental disability.
• Do not expose the device to direct sunlight, high temperatures, excessive humidity
and excessive shocks. Remodeling or modification of the product is prohibited and
has an impact on the safety of the product. Attention, danger of injury! Handle the
product with care.
• An impact or fall from a height may damage the product and result in a subsequent
loss of the warranty. The two-year warranty does not cover mechanical damage
to the device. Use the device solely as instructed to meet the warranty conditions
and prevent injury.
DISPOSAL
This electrical appliance does not belong to domestic waste. For proper
disposal, please contact the public collection in your community. De-
tails on the location of the collection center for electrical waste as well
as the quantitative limitation per day/month/year, as well as the costs
incurred for collection can be found at the local authority of your mu-
nicipality.
DECLARATION OF CONFORMITY
2014/30/EU 2011/65/EU
IMPORTER:
FITSTREAM s.r.o.
Valentiniánova 8
851 10 Bratislava, Slovakia
DESIGNED AND PATENTED IN EUROPE.
www.FitStream.eu
Follow us on social media:
fitstream_eu fitstream.eu