ACD GRUPPE M2Smart SE Guía Breve página 25

To insert the rechargeable battery in the device, tip it diagonally downward and place it in the rechargeable
battery compartment. Insert the rechargeable battery so that the contacts are aligned with the contacts of the
device. Then the rechargeable battery can be folded downward so that the lock snaps in. Then the hand
strap can be hooked back in.
Figure 29: Inserting the rechargeable battery
5 Instructions for Cleaning and Care
Clean the module by setting it down on a surface (e.g. table). This way, you can hold it securely and the
module cannot slip out of your hands during the cleaning process.
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents in order to clean the Mobile Handheld Computer,
battery and docking station.
ATTENTION
All components must be disposed of properly at the end of their
technical lifetime.
ATTENTION
Turn off the device before starting any cleaning or maintenance
process!
Make sure that the laser beam is switched off by checking the
laser beam exit!
Laser beam exit
®
M2Smart SE_Set_Brief Overview_V1.02_en_es_fr 25 / 74