Werkzeyt ZYT380250 Guia De Inicio Rapido página 6

• Never expose the unit to high temperatures and humidity, otherwi-
se the unit may be damaged.
• In case of damage, repairs or other problems with the lamp,
contact the service centre or a qualified electrician.
• Do not mount the lamp on a damp or conductive surface.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and/or knowledge.
Liability is excluded in case of improper use and non-observance
of the operating instructions.
4. Cleaning:
Remove the batteries from the lamp before cleaning. Use a dry cloth
to clean the lamp and never use petrol, solvents or cleaners that
could damage plastics.
Use a slightly damp cloth for heavier soiling.
5. Operation:
Insert batteries:
• Unscrew the rear end of the lamp
• Insert the AAA Micro · LR03 · 1.5 V batteries into the battery
holder. Make sure that the polarity of the batteries and the battery
holder is correct.
• Close the lamp again by screwing the end back on