Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Machine
Note: This appliance is primarily a portable carpet cleaner with a steam-cleaning attachment.
Before you clean, vacuum to remove loose dirt from areas to be cleaned. Spray any BISSELL stain
pretreat formula on soiled areas and allow to sit for a few minutes. Test a small, hidden area for
colorfastness and examine when dry. If color is affected, do not use.
1. Release hose by pulling
away from hose clip.
4. Select cleaning mode to
turn machine ON. Turn dial to
( O ) position to turn OFF.
7. Point tool above stain.
Firmly press and hold trigger.
Note: In
Steam Mode
during initial steam usage and after longer durations without using steam. The longer the trigger is
pressed down, the more consistent the steam is. During periods without using steam, excess water
may build up and dispense upon holding the trigger again. During these instances, continue to hold
the trigger for 5-10 seconds until steam comes out.
2. Attach desired tool
to hose grip until it clicks.
5. If choosing a mode with
steam,
steam light to illuminate.
8.
Release trigger
bristles to scrub area.
or
SteamWash™ Max Clean
for
wait 30 seconds
and use
Mode, it is normal for some liquid to dispense
3. Twist Quick Release
Cord Wrap to remove cord.
Plug cord into outlet.
6. Press and hold trigger
over sink or bowl to prime the
machine until steam is present.
9. To remove stain,
and make "dry passes".
trigger
Firmly apply downward
pressure and move tool slowly
toward you until water can no
longer be seen in nozzle.
BISSELL.com 5
release
Publicidad
